In operation for over 65 years, Eaton's Aeroquip® name represents quality and innovation in the hydraulics industry. Eaton offers Aeroquip hose, fittings, adapters, couplings and fluid connectors for all pressures in industrial, aerospace and automotive applications. Manufacturing facilities strategically located around the globe allows Eaton to offer Aeroquip products on demand to keep its customers up and running around the clock.

Parker

Founded in 1918, the evolution of the Parker Appliance Company into Parker Hannifin Corporation illustrates a legacy of innovation. We believe our future growth is assured by honoring Parker's tradition of excellence.

Specification

Displacement 0.8 – 7.9cm³

Press up to 280 Bar

Speed up to 4000 rpm

Fixed Displacement Vane Pump T Series
– Silent technology 3 3
– Displacement from 5.8 cm /rev to 268.7cm /rev
– Wide shaft option SAE and ISO
– Pressure up to 250 bar Speeds up to 2800 RPM

Gear Pump PGP 500 Series
– Superior performance
– Low noise operation at high pressure
– Internal mounts and connections
– Integrated valve capabilities
– Can be configured as a pump or motor
– Speeds up to 4000 RPM

Radial Piston – Calzoni
MR/ MRE, MRT/MRTE/ MRTF, MRD/MRDE Series
– High starting torque from 90% to 95% of theoretical
– High control at low speed
– High volumetric efficiency up to 98%
– Low noise
– Resistance to thermal shocks
– Long bearing life
– Reversibility
– Speed accessories, brakes
– Speeds up to 1000 RPM

Fixed Displacement Piston F1/F2 Series
– Pressure up to 345 bar
– High power capability
– Twin flow version available
– High self-priming speed
– Speeds up to 2550 RPM

Low Speed High Torque Motor TE, TF, TG and TH series
– High volumetric efficiency
– Full flow spline cooling
– High pressure shaft seal
– High starting torque
– Speeds up to 1100 RPM

Before this takeover, Commercial Hydraulics had established itself as one of the largest world names in the manufacture of: hydraulic pumps, hydraulic gear motors, hydraulic piston pumps, hydraulic flow dividers and hydraulic valves. Now with the backing of Parker, Commercial Hydraulics continues to lead. In fact, their series of hydraulic gear pumps is often called the industry standard by which all other hydraulic gear pumps are measured.

Previously branded Commercial pumps, motors and flow dividers are still made to the same exacting standards by Parker. In fact, the only difference is that the previous Commercial product codes are now preceded by "PG" (Parker Group).

Hydraulic Pumps and Motors

Roller Bearing Gear Pump P30/31, P50/51, P75/76 series
– working pressures to 2500 psi
– Speeds up to 2400 rpm
– Robust cast iron construction
– A wide selection of standard shaft and mounting configuration
– Multiple sections are available
– Optional priority, two-speed, and unloader valves are available
– Single and Multiple pump/motor, Flow Divider, Piggyback and Winch Motor configurations are available

Rotary Flow Divider Intensifier FD30, FD50, FD75 series
– This equipment divides a single oil flow input into several output streams, in direct proportion to the gear widths used.
– The Rotary Flow Divider also acts as an intensifier, transferring energy from total oil flow to that portion being used.

Multiple Section Pump
– Available in up to five pump sections, providing five separate flows from a single output drive.
– The individual flows can be tailored to suit most requirements over a range of speeds.

Bush Bearing Pumps P315, P330, P350, P360 series
– Working pressures to 3500 psi
– Patented interlocking body design
– Bronze thrust plates
– Tandem, triple and cross-frame pumps available
– Wide range of integral valves for power steering, power brakes, fan drives and implement hydraulics
– Reduced system noise levels compared to earlier models and competitors' pumps
– High power through-drive capability

Fixed Displacement Gear Pumps and Motors
– Commercial's extensive range, with displacements from 10.6 to 249.9 cm3/r and working pressure to 3500 psi, can handle the most difficult and heavy work loads, efficiently and effectively.
– A wide sellection if standart shaft and mounting configurations is available to suit most drive requirements.

Hydraulic Valves

Sectional Directional Control Valve DVA 20/35
– Maximum flow rate 40 GPM
– Maximum operating pressure 2500 psi (172 bar)
– Paralel and series circuit

Sectional Directional Control Valve DVG 20/35
– Maximum flow rate 70 GPM
– Maximum operating pressure 3500 psi (241 bar)
– Paralel and series circuit

Sectional Directional Control Valve DVG 20/35 with selenoid operated
– Maximum flow rate 40 GPM / 70 GPM
– Maximum operating pressure 2500 psi (172 bar)
– Paralel and series circuit