In operation for over 65 years, Eaton's Aeroquip® name represents quality and innovation in the hydraulics industry. Eaton offers Aeroquip hose, fittings, adapters, couplings and fluid connectors for all pressures in industrial, aerospace and automotive applications. Manufacturing facilities strategically located around the globe allows Eaton to offer Aeroquip products on demand to keep its customers up and running around the clock.
Parker
Founded in 1918, the evolution of the Parker Appliance Company into Parker Hannifin Corporation illustrates a legacy of innovation. We believe our future growth is assured by honoring Parker's tradition of excellence.
Specification
Displacement 0.8 – 7.9cm3
Press up to 280 Bar
Speed up to 4000 rpm
Fixed Displacement Vane Pump T Series
– Silent technology 3 3
– Displacement from 5.8 cm /rev to 268.7cm /rev
– Wide shaft option SAE and ISO
– Pressure up to 250 bar Speeds up to 2800 RPM
Gear Pump PGP 500 Series
– Superior performance
– Low noise operation at high pressure
– Internal mounts and connections
– Integrated valve capabilities
– Can be configured as a pump or motor
– Speeds up to 4000 RPM
Fixed Displacement Vane Pump T Series
– Silent technology 3 3
– Displacement from 5.8 cm /rev to 268.7cm /rev
– Wide shaft option SAE and ISO
– Pressure up to 250 bar Speeds up to 2800 RPM
Radial Piston – Calzoni
MR/ MRE, MRT/MRTE/ MRTF, MRD/MRDE Series
– High starting torque from 90% to 95% of theoretical
– High control at low speed
– High volumetric efficiency up to 98%
– Low noise
– Resistance to thermal shocks
– Long bearing life
– Reversibility
– Speed accessories, brakes
– Speeds up to 1000 RPM
Fixed Displacement Piston F1/F2 Series
– Pressure up to 345 bar
– High power capability
– Twin flow version available
– High self-priming speed
– Speeds up to 2550 RPM
Low Speed High Torque Motor TE, TF, TG and TH series
– High volumetric efficiency
– Full flow spline cooling
– High pressure shaft seal
– High starting torque
– Speeds up to 1100 RPM
OLAER (Switzerland) AG was founded in 1969 in Colombes (F) as a fiduciary of OLAER Indus-tries SA. It was in 1976 that we were able to move to the facilities where we are currently locat-ed, in Düdingen (in the Canton of Fribourg).
On the 1st of July 2012 the worldwide active OLAER Group was taken over by Parker Hannifin Cleveland. On the 1st of January 2013 OLAER (Schweiz) AG was bought back by its management and became a certified Parker distributor for hydraulics.
Olaer (Schweiz) AG currently employs staff in Switzerland, Germany and Austria. With its products and services in the fields of hydraulics, water and wastewater technology the company ranks among the market leaders in this country. OLAER focuses on new innovative and sustainable industrial and infrastructural products, which are systematically developed further.
Accumulators
 |
AC, IHV, NG, and ELM Series AC, IHV, NG, and ELM Series Accumulators incorporate the lates design and material technologies to improve performance and reliability of the accumulator when it is used in heavy duty application or under severe working conditions |
ELM Series
Operation of the OLAER gas loaded diaphragm accumulator is bassed on the considerable difference in compressibility between a gas and a liquid, enabling a large quantity of energy to be stored in
an extremely compact form. This enables a liquid under pressure to be accumalated, stored and recovered at any time.
Model VGU
Universal charging set fits most of the hydraulic accumulators available on the market. Maximum working pressure: limited by the maximum operating pressure of the installed pressure limted to 400 bar in any case.
Safety Blocks
Are designed to incorporate in a single compact block a variety of functions necessery for the correct operation of
a hydraulic system fitted with accumulators. This includes manual and/or electrical drain, isolation, flow control and pressure relief.
Bladder Accumulator AC, IHV, NG Series and ELM Series
Coolers
PWO Series
Plate water Oil cooler are the modern variant of the traditional shell and tube cooler. Unlike other plate cooler on the market mostly produced for water, steam or chemical applications, the internal structur of the OLAER Fawcett Christie PWO is designed to provide the highest efficiency while offering the lowest pressure drop required for the oil in hydraulics and lubrication applications.
SHELL AND TUBES
Although not as efficient and compact as the Plate Water Oil cooler, Shell and Tubes coolers are still extremely popular in various types of industries. OLEAR Fawcett Christie therefor strives to find the best possible design that would combine a limited water flow rate with a maximum efficiency.
Air Oil Cooler
ECO, LAC, LDC, LHC and LOC series
– AC and DC motor available
– Cooler matrix with low pressure drop and high cooling capacity – Simply and user friendly design